How to save the amount of adhesive for FRP strengthening?

When strengthening with FRP(fiber reinforced polymer composite), we should must to ensure good results, and also save cost. What should we do?

applying carbon fiber laminate adhesive

Thickness requirements of carbon fiber adhesive for FRP strengthening(fiber reinforced polymer composites):

Horse Construction’s bongding adhesive

1. the amount of the first layer of each carbon fiber fabric is 0.7-0.8kg, and the second layer is 0.60kg.

2. The amount of adhesive for each bonded steel plate is about 5-7kg.

3. The amount of adhesive for perfusion steel plate is about 5kg.

Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

Part A (Epoxy): 20kg
Part B (Hardener): 10kg
Mix Ratio: Part A: Part B=2:1
Consumption Ratio: 0.6-0.9kg/sqm
See more >

Part A (Epoxy): 15kg
Part B (Hardener): 5kg
Mix Ratio: Part A: Part B=3:1
Barrel A Size: 30*30*37cm
Barre

Two batteries, each one 4800 mAh
6 Speed mode
Portable design
Best for Large scale anchoring